Anti-wear vertical design centrifugal disc stack separator for cutting fluid clarification
Centrifugal separation technology for cutting fluid
In modern industrial production, lubricants are needed in many industries, such as steel plate processing, cutting fluids in mechanical processing plants, vacuum pumps and etc. Lubricating oil greatly facilitates the production and processing procedures, but the price of lubricating oil is expensive, and if it is directly discharged, it will cause serious environmental pollution. Therefore, HUADING specially designed a series disc separator for lubricating oil recovery, which not only can increase the amount of lubricating oil. It can save the cost greatly and protect the environment from damage at the same time.
Product description
Huading three-phase disc separators are widely used in lubricating oil recovery. According to different types of lubricants, the types of centrifuges are also different. According to the different oil-water ratio, the centrifuge drum structure is also very different. For materials containing harder impurities, the centrifuge drum is equipped with anti-wear parts. The machine adopts on-line pressure regulation. According to the effect of separation, it can be adjusted quickly. After the equipment is debugged, the centrifuge runs fully automatically under PLC control without manual intervention. According to customer needs, the centrifuge The output range is between 200-20000L/H.
Main parameter
| Voltage | 220-440V |
| Power | 4-90KW |
| HMI | SIEMENS |
| PLC | SIEMENS |
| Frequency converter | ABB or CUMARK |
| Motor | ABB or WANNAN |
Separation effect
Product Tags:
|
|
MISD Biodiesel Separator Images
|
